news
Mingding Texture - Manufacturer of automotive textures
Maintaining the continuity of the skin pattern boils down to the following?
Release time:
2023-06-09
(1) a single part of the skin corrosion area, generally corroded to the parts of the assembly to the visual surface until the appearance of the parts, such as Figure 4 door guard assembly, each single piece of skin corrosion in the door guard assembly visual surface as a benchmark.
(2) a single part of the R corner, that is, the parts of the two adjacent surfaces of the transition and arc-shaped area, the skin pattern to do the visible surface to the R corner of the direction of about 2 ~ 4mm range, to ensure that the human visual range to see the place are etched grain processing. As shown in Figure 5, the right side of the instrument panel access cover with the surrounding parts, the exposed part is the R corner of the surface. If the skin pattern is not done R corner, the surface will feel the skin pattern interruption, affecting the aesthetic.
(3) The same part has two kinds of leather pattern of the intersection area:
Such as the door guard body, the same parts on different areas defined by two kinds of skin texture, the junction area of the two skin texture corrosion in particular to ensure that the two kinds of skin texture of the smooth transition, usually on the R corner to do the corresponding processing, such as over the R corner is slightly shallow or in the joints away from the place where the seam begins to become shallow in 2-3mm.
Related News
More than 20 years of professional focus on mold leather processing
©2023 Taizhou Huangyan Mingding Mould Leather Grain Co., Ltd.